KenWood TS-480SAT lightly used.

Description

KenWood TS-480SAT lightly used.. MARS Option available at Ham Radio Outlet
TS-480SAT/HX
Features
Specs
Support
Accessories
TS-480HX
TS-480SAT
General
Transmitter Frequency Range
160, 80, 60, 40, 30, 20, 17, 15, 12, 10, 6m bands
Receiver Frequency Range
0.5 - 30MHz, 50 - 54MHz (VFO: Continuous 30kHz - 60MHz)
Mode
SSB (J3E), CW (A1A), FSK (F1B), FM (F3E), AM (A3E)
Power Requirement
DC1: 13.8V±15%
DC2: 13.8V±15%*
DC13.8V±15%
Current Drain
Transmit
Standby
DC1: Less than 20.5A;
DC 2: Less than 20.5A*
Less than 1.5A
Less than 20.5A
Less than 1.5A
Operating Temperature
-20°C - +60°C
Frequency Stability
Main unit : Within ±5ppm (-10°C - +50°C)
Within ±10ppm (-20°C - +60°C)
With optional SO-3 attached : Within ±0.5ppm (-10°C - +50°C)
Within ±1.0ppm (-20°C - +60°C)
Antenna Impedance
50Ω
Microphone Impedance
600Ω
Grounding Method
Negative ground
Dimensions (W x H x D)
Main unit: without / with projections: 7-1/16" x 2-3/8" x 10-3/16" (179 x 61 x 258 mm) /
7-1/16" x 2-3/4" x 10-15/16" (179 x 69.5 x 278 mm)
Panel: without / with projections: 7-1/16" x 2-15/16" x 1-7/16" (180 x 75 x 37mm) /
7-3/16" x 3-1/16" x 2-11/16"(183 x 78 x 68mm)
Weight (approx.)
8.15lbs: Main unit 7.05lbs/Panel 1.1lbs (3.7kg: Main unit 3.2kg / Panel 0.5kg)
TRANSMITTER
RF Output Power
HF (AM)
50MHz (AM)
200W (50W)
100W (25W)
100W (25W)
100W (25W)
Modulation: SSB / FM / AM
Balanced / Phase / Low Power
Maximum Frequency Deviation: Wide / Narrow
Less than ±5kHz / Less than ±2.5kHz
Spurious Radiation: HF / 50MHz
Less than -50dB / Less than -60dB
Carrier Suppression
More than 40dB (SSB)
Unwanted Sideband Suppression
More than 40dB (SSB)
Transmit Frequency Response
400 - 2600Hz (within -6dB)
XIT Variable Range
±9.99kHz
Antenna Tuner Matching Range (1.9MHz - 50MHz)
-
16.7 - 150Ω
RECEIVER
Circuitry
SSB, CW, AM, FSK
FM
Double superheterodyne
Triple superheterodyne
Intermediate Frequency: 1st IF / 2nd IF / 3rd IF
73.095MHz / 10.695MHz / 455kHz (FM only)
Sensitivity
SSB / CW / FSK (S/N 10dB)
AM (S/N 10dB)
FM 12dB SINAD
Less than 4µV (0.5 - 1.705MHz)
Less than 0.2µV (1.705 - 24.5MHz)
Less than 0.13µV (24.5 - 30MHz)
Less than 0.13µV (50 - 54MHz)
Less than 31.6µV (0.5 - 1.705MHz)
Less than 2µV (1.705 - 24.5MHz)
Less than 1.3µV (24.5 - 30MHz)
Less than 1.3µV (50 - 54MHz)
Less than 0.22µV (28 - 30MHz)
Less than 0.22µV (50 - 54MHz)
Squelch Sensitivity
SSB /CW /FSK /AM
FM
Less than 18µV (0.5 - 1.705MHz)
Less than 1.8µV (1.8 - 30MHz)
Less than 1.1µV (50 - 54MHz)
Less than 0.2µV (28 - 30MHz)
Less than 0.2µV (50 - 54MHz)
Image Rejection Ratio
More than 70dB
IF Rejection Ratio
More than 70dB
Squelch Sensitivity
SSB /CW /FSK
AM
FM
More than 2.4kHz (-6dB), Less than 4.4kHz (-60dB)
More than 5.0kHz (-6dB), Less than 40kHz (-60dB)
More than 12.0kHz (-6dB), Less than 25.0kHz (-50dB)
RIT Variable Range
±9.99kHz
Beat Elimination
More than 40dB (1kHz)
Audio Output Power
More than 2.0W (8 Ω, 10% distortion)
*1 Voltage differential between DC1 and DC 2 is within 1V.
*2 Two power sources each of more than 20.5A or a single 41A source (20.5 + 20.5A) required.
These specifications are guaranteed for Amateur Bands only.
KENWOOD follows a policy of continuous advancement in development.
For this reason, specifications may be changed without notice.