-40%

4 pack 1930's Toyota TEQ Logo Vinyl Decal Gloss Red 1.75" x 1.75"(4.4cm x 4.4cm)

€ 2.5

Availability: 49 in stock
  • Manufacturer Part Number: Does Not Apply
  • Type: Body Decal
  • Primary Color: Red
  • Theme: Graphic
  • Brand: Oracal 651
  • Color: Red
  • Size: 1.75" x 1.75" (4.4cm x 4.4cm)
  • Warranty: 1 Year
  • Material: Vinyl
  • Condition: New
  • Returns Accepted: ReturnsNotAccepted
  • Finish: Glossy
  • Placement on Vehicle: Left
  • Country/Region of Manufacture: United States

    Description

    4 Decals per order
    Size: 1.75" x 1.75"
    (4.4cm x 4.4cm)
    Color: Gloss Red    (for other colors and sizes please message)
    Material: High quality vinyl with average life of 6 years outdoors ( longer if used indoor)
    *in last image I have available colors, if wanting please put in notes,if no note is included Gloss Red will be sent.
    *Free shipping Will be shipped USPS Economy please allow 3-9 business days to receive
    **Faster shipping select 1st class package and typically receive in 2-4 days and will have tracking
    Instructions to apply decal/Sticker
    On decals larger than 6" it is recommended for someone with experience or
    shop install for best results
    Before applying please make surface is clean , we typically will wipe surface with
    50% isopropyl alcohol and wipe dry with a clean dry microfiber towel.
    1. Lay decal face down and on flat surface
    2.Slowly remove backing paper at a 180 degree angle,make sure
    the decal is sticking to the translucent Tape side.
    3.Apply to a clean,non-porous surface.
    4.Using an object with a hard flat edge(Squeegee is recommended but some have used credit cards),
    press the translucent transfer tape firmly,concentrating on the vinyl areas,working from the
    center of the decal outward.
    5.Carefully remove the translucent transfer tape from the decal at a 180 degree angle,
    making sure the vinyl decal adheres to the surface being applied to.
    6. After removing all of the translucent transfer tape you may need to press down decal to
    ensure it is flat against surface being applied to.